Separation of acetic acid, formic acid, succinic acid, and lactic acid using adsorbent resin

Hee Geun Nam, Geon Woo Lim, Sungyong Mun

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

The single-component adsorption equilibria of acetic acid and formic acid on an Amberchrom-CG300C resin were measured using a staircase frontal analysis method over the temperature range from (30 to 50) °C at liquid-phase concentrations of up to 10 g·L -1. The resultant adsorption data were correlated with the Langmuir model, and the corresponding model parameters were determined. In addition, the effect of temperature on the Langmuir equilibrium constants was investigated, and the results were utilized to determine the thermodynamic parameters for the adsorption of interest. The results of these investigations indicated that the adsorption of each organic acid onto Amberchrom CG300C is exothermic and controlled by physical mechanisms. Furthermore, a temperature-modulated adsorption model for each organic acid was developed by incorporating its thermodynamic parameters into the Langmuir model. The resultant temperature-modulated Langmuir model equation was confirmed to be highly accurate in predicting all of the adsorption equilibrium data acquired over the investigated temperature range. The adsorption equilibrium data and the model parameters reported in this study will be of great value in designing a chromatographic process for separating the organic acid mixture resulting from fermentation based on Actinobacillus bacteria.

Original languageEnglish
Pages (from-to)2102-2108
Number of pages7
JournalJournal of Chemical and Engineering Data
Volume57
Issue number8
DOIs
StatePublished - 2012 Aug 9

Fingerprint

formic acid
Formic acid
Succinic Acid
Lactic acid
Acetic acid
Acetic Acid
Adsorbents
Lactic Acid
Resins
Adsorption
Acids
Organic acids
Temperature
Thermodynamics
Equilibrium constants
Fermentation

Cite this

@article{f4e9a721dd29468b991b8a3dc40d97bd,
title = "Separation of acetic acid, formic acid, succinic acid, and lactic acid using adsorbent resin",
abstract = "The single-component adsorption equilibria of acetic acid and formic acid on an Amberchrom-CG300C resin were measured using a staircase frontal analysis method over the temperature range from (30 to 50) °C at liquid-phase concentrations of up to 10 g·L -1. The resultant adsorption data were correlated with the Langmuir model, and the corresponding model parameters were determined. In addition, the effect of temperature on the Langmuir equilibrium constants was investigated, and the results were utilized to determine the thermodynamic parameters for the adsorption of interest. The results of these investigations indicated that the adsorption of each organic acid onto Amberchrom CG300C is exothermic and controlled by physical mechanisms. Furthermore, a temperature-modulated adsorption model for each organic acid was developed by incorporating its thermodynamic parameters into the Langmuir model. The resultant temperature-modulated Langmuir model equation was confirmed to be highly accurate in predicting all of the adsorption equilibrium data acquired over the investigated temperature range. The adsorption equilibrium data and the model parameters reported in this study will be of great value in designing a chromatographic process for separating the organic acid mixture resulting from fermentation based on Actinobacillus bacteria.",
author = "Nam, {Hee Geun} and Lim, {Geon Woo} and Sungyong Mun",
year = "2012",
month = "8",
day = "9",
doi = "10.1021/je201065u",
language = "English",
volume = "57",
pages = "2102--2108",
journal = "Journal of Chemical and Engineering Data",
issn = "0021-9568",
number = "8",

}

Separation of acetic acid, formic acid, succinic acid, and lactic acid using adsorbent resin. / Nam, Hee Geun; Lim, Geon Woo; Mun, Sungyong.

In: Journal of Chemical and Engineering Data, Vol. 57, No. 8, 09.08.2012, p. 2102-2108.

Research output: Contribution to journalArticle

TY - JOUR

T1 - Separation of acetic acid, formic acid, succinic acid, and lactic acid using adsorbent resin

AU - Nam, Hee Geun

AU - Lim, Geon Woo

AU - Mun, Sungyong

PY - 2012/8/9

Y1 - 2012/8/9

N2 - The single-component adsorption equilibria of acetic acid and formic acid on an Amberchrom-CG300C resin were measured using a staircase frontal analysis method over the temperature range from (30 to 50) °C at liquid-phase concentrations of up to 10 g·L -1. The resultant adsorption data were correlated with the Langmuir model, and the corresponding model parameters were determined. In addition, the effect of temperature on the Langmuir equilibrium constants was investigated, and the results were utilized to determine the thermodynamic parameters for the adsorption of interest. The results of these investigations indicated that the adsorption of each organic acid onto Amberchrom CG300C is exothermic and controlled by physical mechanisms. Furthermore, a temperature-modulated adsorption model for each organic acid was developed by incorporating its thermodynamic parameters into the Langmuir model. The resultant temperature-modulated Langmuir model equation was confirmed to be highly accurate in predicting all of the adsorption equilibrium data acquired over the investigated temperature range. The adsorption equilibrium data and the model parameters reported in this study will be of great value in designing a chromatographic process for separating the organic acid mixture resulting from fermentation based on Actinobacillus bacteria.

AB - The single-component adsorption equilibria of acetic acid and formic acid on an Amberchrom-CG300C resin were measured using a staircase frontal analysis method over the temperature range from (30 to 50) °C at liquid-phase concentrations of up to 10 g·L -1. The resultant adsorption data were correlated with the Langmuir model, and the corresponding model parameters were determined. In addition, the effect of temperature on the Langmuir equilibrium constants was investigated, and the results were utilized to determine the thermodynamic parameters for the adsorption of interest. The results of these investigations indicated that the adsorption of each organic acid onto Amberchrom CG300C is exothermic and controlled by physical mechanisms. Furthermore, a temperature-modulated adsorption model for each organic acid was developed by incorporating its thermodynamic parameters into the Langmuir model. The resultant temperature-modulated Langmuir model equation was confirmed to be highly accurate in predicting all of the adsorption equilibrium data acquired over the investigated temperature range. The adsorption equilibrium data and the model parameters reported in this study will be of great value in designing a chromatographic process for separating the organic acid mixture resulting from fermentation based on Actinobacillus bacteria.

UR - http://www.scopus.com/inward/record.url?scp=84864953700&partnerID=8YFLogxK

U2 - 10.1021/je201065u

DO - 10.1021/je201065u

M3 - Article

AN - SCOPUS:84864953700

VL - 57

SP - 2102

EP - 2108

JO - Journal of Chemical and Engineering Data

JF - Journal of Chemical and Engineering Data

SN - 0021-9568

IS - 8

ER -