Find Research Outputs

Search concepts
Selected Filters
2019
2 Citations (Scopus)

Effect of titanium addition on mechanical properties of Mo-Si-B alloys

Choi, W. J., Lee, S. Y., Park, C. W., Park, J. H., Byun, J. M. & Kim, Y. D., 2019 Apr, In : International Journal of Refractory Metals and Hard Materials. 80, p. 238-242 5 p.

Research output: Contribution to journalArticle

Titanium
Mechanical properties
Grain boundaries
Intermetallics
Fracture toughness
1 Citation (Scopus)

Improvement of high temperature mechanical properties of Ni-based oxide dispersion strengthened alloys by preferential formation of Y-Ti-O complex oxide

Park, C. W., Byun, J. M., Choi, W. J., Lee, S. Y. & Kim, Y. D., 2019 Jan 7, In : Materials Science and Engineering A. 740-741, p. 363-367 5 p.

Research output: Contribution to journalArticle

Oxides
mechanical properties
Mechanical properties
oxides
Temperature
1 Citation (Scopus)

Volume and size effects of intermetallic compounds on the high-temperature oxidation behavior of Mo-Si-B alloys

Choi, W. J., Park, C. W., Park, J. H., Kim, Y. D. & Byun, J. M., 2019 Jun 1, In : International Journal of Refractory Metals and Hard Materials. 81, p. 94-99 6 p.

Research output: Contribution to journalArticle

Thermooxidation
Intermetallics
Oxidation resistance
Volume fraction
Oxidation
2018

Densification of Mo nanopowders by ultra high pressure compaction

Ahn, C. H., Choi, W. J., Park, C. W., Lee, S. Y. & Kim, Y. D., 2018 Mar 1, In : Korean Journal of Materials Research. 28, 3, p. 166-173 8 p.

Research output: Contribution to journalArticle

Molybdenum
Densification
Compaction
Sintering
Melting point
2017
7 Citations (Scopus)
Ball milling
Densification
Powders
Composite materials
Liquid phase sintering
6 Citations (Scopus)

Effect of heat treatment on corrosion resistance and adhesion property in Zn-Mg-Zn multi-layer coated steel prepared by PVD process

Byun, J. M., Bang, S. R., Kim, H. W., Kim, T. Y., Hong, S. J. & Kim, Y. D., 2017 Jan 15, In : Surface and Coatings Technology. 309, p. 1010-1014 5 p.

Research output: Contribution to journalArticle

Steel
Physical vapor deposition
corrosion resistance
Intermetallics
intermetallics

Formation of nanostructured rutile TiO 2 synthesized on Ti powder via thermal oxidation

Byun, J. M., Choi, H. R., Kim, S. H., Suk, M. J. & Kim, Y. D., 2017 Sep 1, In : Applied Surface Science. 415, p. 43-48 6 p.

Research output: Contribution to journalArticle

Powders
Oxidation
Oxygen
Specific surface area
Hot Temperature
1 Citation (Scopus)

Heat treatment effect on the behavior of oxide particles in mechanically alloyed oxide dispersion strengthened powders

Kim, G. E., Noh, S., Kang, S. H., Kim, Y. D. & Kim, T. K., 2017 Dec 1, In : Science of Advanced Materials. 9, 12, p. 2126-2130 5 p.

Research output: Contribution to journalArticle

Powders
Oxides
Heat treatment
Mechanical alloying
Transmission electron microscopy
Refractory metals
hard metal
3 Citations (Scopus)

Influence of B and N on the microstructural characteristics and high-temperature strength of 9Cr-2W steel during an aging treatment

Jeong, E. H., Kim, J. H., Kim, S. H. & Kim, Y. D., 2017 Jul 17, In : Materials Science and Engineering A. 700, p. 701-706 6 p.

Research output: Contribution to journalArticle

Steel
Aging of materials
Hardness
steels
hardness
5 Citations (Scopus)

Mechanical properties of Mo-Nb-Si-B quaternary alloy fabricated by powder metallurgical method

Byun, J. M., Bang, S. R., Kim, S. H., Choi, W. J. & Kim, Y. D., 2017 Jun 1, In : International Journal of Refractory Metals and Hard Materials. 65, p. 14-18 5 p.

Research output: Contribution to journalArticle

Niobium
Powders
Mechanical properties
Fracture toughness
Vickers hardness
1 Citation (Scopus)

Mechanical properties of Mo-Si-B alloys fabricated by using core-shell powder with dispersion of yttria nanoparticles

Byun, J. M., Bang, S. R., Choi, W. J., Kim, M. S., Noh, G. W. & Kim, Y. D., 2017 Jan 1, In : Metals and Materials International. 23, 1, p. 170-174 5 p.

Research output: Contribution to journalArticle

Yttrium oxide
Powders
mechanical properties
Nanoparticles
Mechanical properties

Phase transformation behavior of oxide particles formed in mechanically Alloyed Fe-5Y2O3 powder

Kim, G. E., Choi, J. S., Noh, S., Kang, S. H., Choi, B. K., Kim, Y. D. & Kim, T. K., 2017 May, In : Journal of Korean Institute of Metals and Materials. 55, 5, p. 357-362 6 p.

Research output: Contribution to journalArticle

Phase Transformation
Powder
Powders
Oxides
Phase transitions
4 Citations (Scopus)

Photocatalytic activity under UV/Visible light range of Nb-doped titanate nanostructures synthesized with Nb oxide

Byun, J. M., Choi, H. R., Kim, Y. D., Sekino, T. & Kim, S. H., 2017 Sep 1, In : Applied Surface Science. 415, p. 126-131 6 p.

Research output: Contribution to journalArticle

Oxides
Nanostructures
rhodamine B
Trinitrotoluene
Methylene Blue
9 Citations (Scopus)

Sintering behavior of garnet-type Li7La3Zr2O12-Li3BO3 composite solid electrolytes for all-solid-state lithium batteries

Shin, R. H., Son, S. I., Han, Y. S., Kim, Y. D., Kim, H. T., Ryu, S. S. & Pan, W., 2017 Mar 1, In : Solid State Ionics. 301, p. 10-14 5 p.

Research output: Contribution to journalArticle

Lithium batteries
lithium batteries
Solid electrolytes
Garnets
solid electrolytes
2 Citations (Scopus)
Ingots
Powders
Intermetallics
Hydrogen
Spark plasma sintering
2016

A Phenomenological Analysis on the Anisotropic Shrinkage of Nd-Fe-B Compacts during Sintering Process

Byun, J. M., Kim, M. S., Kim, S. H., Kim, J. W. & Kim, Y. D., 2016 Jul 1, In : IEEE Transactions on Magnetics. 52, 7, 7442136.

Research output: Contribution to journalArticle

Sintering
Compaction
Magnets
Magnetic fields
Coercive force
1 Citation (Scopus)

Double-stage sintering behavior of a nickel nanoparticle dispersed micro powder

Jeon, B., Lee, G., Kim, Y. D., Kim, B. & Choi, H., 2016 Jan 1, In : Journal of Alloys and Compounds. 689, p. 820-828 9 p.

Research output: Contribution to journalArticle

Nickel
Powders
Sintering
Nanoparticles
Compaction
9 Citations (Scopus)

Effect of Li3BO3 additive on densification and ion conductivity of garnet-type Li7La3Zr2O12 solid electrolytes of all-solid-state lithium-ion batteries

Shin, R. H., Son, S. I., Lee, S. M., Han, Y. S., Kim, Y. D. & Ryu, S. S., 2016 Nov 1, In : Journal of the Korean Ceramic Society. 53, 6, p. 712-718 7 p.

Research output: Contribution to journalArticle

Solid electrolytes
Garnets
Densification
Sintering
Ionic conductivity

Effect of tin addition on the melting temperatures and mechanical properties of Al-Si-Cu brazing filler metals

Kim, M. S., Park, C. W., Byun, J. M. & Kim, Y. D., 2016 Jan 1, In : Korean Journal of Materials Research. 26, 7, p. 376-381 6 p.

Research output: Contribution to journalArticle

Brazing filler metals
Filler metals
Tin
Melting point
Mechanical properties

Fluctuation of solid-liquid interface of faceted phase and nonfaceted phase by periodic temperature variation

Oh, S. T., Kim, Y. D., Song, Y. J. & Suk, M. J., 2016 Jan 1, In : Korean Journal of Materials Research. 26, 11, p. 644-648 5 p.

Research output: Contribution to journalArticle

Camphene
Liquids
Naphthalene
Temperature
Camphor

Improvement of electro-optic characteristics of white light-emitting diodes by using transparent ceramic-based remote phosphors

Choi, M. H., Lee, H. J., Ko, J. H., Kim, D. H., Kim, H. S. & Kim, Y. D., 2016 Feb 1, In : Science of Advanced Materials. 8, 2, p. 342-348 7 p.

Research output: Contribution to journalArticle

Electrooptical effects
Phosphors
Light emitting diodes
Aluminum Oxide
Alumina

Microstructure and electrical properties of sic dispersed molybdenum silicide composite

Byun, J. M., Bang, S. R., Kim, S. H. & Kim, Y. D., 2016 Jun 29, In : Powder Metallurgy. 59, 3, p. 197-202 6 p.

Research output: Contribution to journalArticle

Molybdenum
molybdenum
Electric properties
electrical properties
microstructure
6 Citations (Scopus)

Microstructure of nano-sized oxide particles formed in uniaxial hot pressed Fe-5Y2O3 Alloy

Kim, G. E., Kim, Y. D., Noh, S. & Kim, T. K., 2016 Jan 1, In : Journal of Korean Institute of Metals and Materials. 54, 7, p. 533-539 7 p.

Research output: Contribution to journalArticle

Oxides
Microstructure
Mechanical alloying
Crystal Structure
Powder
8 Citations (Scopus)

Structural size effects of intermetallic compounds on the mechanical properties of Mo-Si-B alloy: An experimental investigation

Byun, J. M., Bang, S. R., Park, C. W., Suk, M. J. & Kim, Y. D., 2016 Jan 1, In : Metals and Materials International. 22, 1, p. 81-86 6 p.

Research output: Contribution to journalArticle

Intermetallics
intermetallics
mechanical properties
Mechanical properties
Powders
2015

Analysis on bowing and formation of Al doped P+ layer by changes of thickness of N-type wafer and amount of Al paste

Park, T. J., Byun, J. M. & Kim, Y. D., 2015 Jan 1, In : Korean Journal of Materials Research. 25, 1, p. 16-20 5 p.

Research output: Contribution to journalArticle

Bending (forming)
Thermal expansion
Solar cells
Electrodes
1 Citation (Scopus)

Double step sintering behavior of 316L nanoparticle dispersed micro-sphere powder

Jeon, B., Sohn, S. H., Lee, W., Han, C., Kim, Y. D. & Choi, H., 2015 Jan 1, In : Archives of Metallurgy and Materials. 60, 2, p. 1155-1158 4 p.

Research output: Contribution to journalArticle

Powders
Sintering
Nanoparticles
Stainless Steel
Compaction
5 Citations (Scopus)

Evaluation of the effect of B and N on the microstructure of 9Cr-2W steel during an aging treatment for SFR fuel cladding tubes

Jeong, E. H., Park, S. G., Kim, S. H. & Kim, Y. D., 2015 Dec 1, In : Journal of Nuclear Materials. 467, p. 527-533 7 p.

Research output: Contribution to journalArticle

Fast reactors
nuclear fuels
Steel
Precipitates
precipitates
1 Citation (Scopus)

Fabrication of porous Ti by thermal decomposition and sintering of PMMA/TiH2 powder compact

Jeon, K. C., Kim, Y. D., Suk, M. J. & Oh, S. T., 2015 Jan 1, In : Archives of Metallurgy and Materials. 60, 2, p. 1375-1377 3 p.

Research output: Contribution to journalArticle

Polymethyl Methacrylate
Powders
Pyrolysis
Sintering
Fabrication

Fabrication of Porous W by freeze-drying process of camphene slurries with spherical PMMA and WO3 powders

Lee, H. E., Jeon, K. C., Kim, Y. D., Suk, M. J. & Oh, S. T., 2015 Jan 1, In : Korean Journal of Materials Research. 25, 11, p. 602-606 5 p.

Research output: Contribution to journalArticle

Camphene
Slurries
Polymethyl Methacrylate
Powders
Drying
5 Citations (Scopus)

Freeze drying for porous Mo with different sublimable vehicle compositions in the camphor-naphthalene system

Oh, S. T., Kim, Y. D. & Suk, M. J., 2015 Jan 15, In : Materials Letters. 139, p. 268-270 3 p.

Research output: Contribution to journalArticle

Camphor
camphor
freeze drying
Naphthalene
naphthalene
5 Citations (Scopus)

Grain refinement in heavy rare earth element-free sintered Nd-Fe-B magnets by addition of a small amount of molybdenum

Kim, J. W., Lee, W. S., Byun, J. M., Kim, S. H. & Kim, Y. D., 2015 May 7, In : Journal of Applied Physics. 117, 17, 17B523.

Research output: Contribution to journalArticle

refractory metals
molybdenum
magnets
rare earth elements
remanence
15 Citations (Scopus)

Microstructure control of Mo–Si–B alloy for formation of continuous α-Mo phase

Byun, J. M., Hwang, S. H., Lee, S., Suk, M. J., Oh, S. T. & Kim, Y. D., 2015 Nov 1, In : International Journal of Refractory Metals and Hard Materials. 53, p. 61-65 5 p.

Research output: Contribution to journalArticle

Intermetallics
Microstructure
Powders
Mechanical properties
Superalloys

Microstructure of the Nb-Si-B alloys in the Nb+T2 region

Choo, S. H., Kim, Y. D., Oh, S. T., Lee, S., Ryu, S. S. & Suk, M. J., 2015 Jan 1, In : Journal of Korean Institute of Metals and Materials. 53, 1, p. 43-50 8 p.

Research output: Contribution to journalArticle

Microstructure
Intermetallics
Oxidation resistance
Chemical analysis
Oxidation
5 Citations (Scopus)

Porous Mo-30 wt.% W alloys synthesized from camphene/MoO3-WO3 slurry by freeze drying and sintering process

Jeon, K. C., Kim, B. S., Kim, Y. D., Suk, M. J. & Oh, S. T., 2015 Nov, In : International Journal of Refractory Metals and Hard Materials. 53, p. 32-35 4 p.

Research output: Contribution to journalArticle

Camphene
Drying
Sintering
Struts
Sublimation
2014
37 Citations (Scopus)

Dependence of magnetic, phase-transformation and microstructural characteristics on the Cu content of Nd-Fe-B sintered magnet

Kim, T. H., Lee, S. R., Lee, M. W., Jang, T. S., Kim, J. W., Kim, Y. D. & Kim, H. J., 2014 Mar 1, In : Acta Materialia. 66, p. 12-21 10 p.

Research output: Contribution to journalArticle

Magnets
Phase transitions
Phase boundaries
Coercive force
Sintering
12 Citations (Scopus)

Effects of the two-step sintering process on the optical transmittance and mechanical strength of polycrystalline alumina ceramics

Kim, H. S., Oh, S. T. & Kim, Y. D., 2014 Jan 1, In : Ceramics International. 40, 9 PART A, p. 14471-14475 5 p.

Research output: Contribution to journalArticle

Aluminum Oxide
Opacity
Strength of materials
Alumina
Sintering

Enhancement of platinum catalytic proeprty by the fabrication platinum-titanium oxide nanocomposite

Kim, J. Y., Byun, J. M., Park, T. J., Kim, Y. D. & Jung, T. K., 2014 Jan 1, Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014. Metal Powder Industries Federation, p. 21-26 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

platinum oxides
Titanium oxides
Platinum
titanium oxides
Nanocomposites
13 Citations (Scopus)

Experimental investigation of diffusion behavior between molten Mg and Nd-Fe-B magnets

Chae, H. J., Kim, Y. D., Kim, B. S., Kim, J. G. & Kim, T. S., 2014 Jan 1, In : Journal of Alloys and Compounds. 586, SUPPL. 1

Research output: Contribution to journalArticle

Neodymium
Magnesium
Magnets
Molten materials
Magnesium castings
7 Citations (Scopus)

Fabrication of Mo-Si-B intermetallic powder by mechano-chemical process

Hwang, S. H., Byun, J. M., Lee, S., Suk, M. J., Oh, S. T. & Kim, Y. D., 2014 Jan 1, In : Journal of Alloys and Compounds. 585, p. 418-422 5 p.

Research output: Contribution to journalArticle

Powders
Intermetallics
Superalloys
Fabrication
Microstructure

Magnetic and microstructural characteristics of Nd-Fe-B sintered magnets produced by Dy sputter coating process

Kim, J. W., Byun, J. M., Park, J. H. & Kim, Y. D., 2014 Jan 1, Advances in Powder Metallurgy and Particulate Materials - 2014, Proceedings of the 2014 World Congress on Powder Metallurgy and Particulate Materials, PM 2014. Metal Powder Industries Federation, p. 9200-9207 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Magnets
coating
magnets
Powders
Coatings
6 Citations (Scopus)

The effects of ultrasonic nanocrystal surface modification (UNSM) on pack aluminizing for the fabrication of Pt-modified aluminide coatings at low temperatures

Hong, S. J., Kim, Y. D., Lee, G. H., Cho, I. S., Lee, C. S. & Kang, S. G., 2014 Jan 1, In : Intermetallics. 46, p. 65-71 7 p.

Research output: Contribution to journalArticle

Nanocrystals
Surface treatment
Ultrasonics
Fabrication
Coatings
2013
17 Citations (Scopus)

Corrosion behavior of Mg2Zn11 and MgZn2 single phases

Byun, J. M., Yu, J. M., Kim, D. K., Kim, T. Y., Jung, W. S. & Kim, Y. D., 2013 Jun 1, In : Journal of Korean Institute of Metals and Materials. 51, 6, p. 413-419 7 p.

Research output: Contribution to journalArticle

Corrosion Resistance
Corrosion
Corrosion resistance
Surface analysis
Alloying
1 Citation (Scopus)

Evaluation of the mechanical properties of Zn-Mg alloys with composition of Mg

Yu, J. M., Byun, J. M., Kim, T. Y., Jung, W. S. & Kim, Y. D., 2013 Jun 1, In : Journal of Korean Institute of Metals and Materials. 51, 6, p. 393-398 6 p.

Research output: Contribution to journalArticle

Mechanical Properties
Mechanical properties
Hardness
Evaluation
Chemical analysis
1 Citation (Scopus)

Fabrication of porous Ti by freeze-drying and heat treatment of TiH2/camphene slurries

Seo, H. G., Kim, Y. D., Suk, M. J. & Oh, S. T., 2013 Nov 6, In : Korean Journal of Materials Research. 23, 6, p. 339-343 5 p.

Research output: Contribution to journalArticle

Camphene
Slurries
Drying
Heat treatment
Fabrication
17 Citations (Scopus)

Nd-Fe-B permanent magnets fabricated by low temperature sintering process

Kim, J. W., Kim, S. H., Song, S. Y. & Kim, Y. D., 2013 Feb 25, In : Journal of Alloys and Compounds. 551, p. 180-184 5 p.

Research output: Contribution to journalArticle

Permanent magnets
Sintering
Magnets
Coercive force
Powders
6 Citations (Scopus)

Phosphorus removal from wastewater by ionic exchange using a surface-modified Al alloy filter

Seo, Y. I., Hong, K. H., Kim, S. H., Chang, D., Lee, K. H. & Kim, Y. D., 2013 May 25, In : Journal of Industrial and Engineering Chemistry. 19, 3, p. 744-747 4 p.

Research output: Contribution to journalArticle

Phosphorus
Phosphates
Wastewater
Alkalies
Surface treatment
2012
4 Citations (Scopus)

Effect of cyclic sintering process for NdFeB magnet on microstructure and magnetic properties

Kim, J. W., Song, S. Y. & Kim, Y. D., 2012 Nov 5, In : Journal of Alloys and Compounds. 540, p. 141-144 4 p.

Research output: Contribution to journalArticle

Magnets
Magnetic properties
Sintering
Coercive force
Microstructure

Effect of two-step sintering on optical transmittance and mechanical strength of polycrystalline alumina ceramics

Kim, H. S., Kim, Y. D. & Kim, S. W., 2012 Jan 1, Advances in Sintering Science and Technology II - A Collection of Papers Presented at the International Conference on Sintering 2011. American Ceramic Society, p. 185-192 8 p. (Ceramic Transactions; vol. 232).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Aluminum Oxide
Opacity
Strength of materials
Alumina
Sintering